SRM-7X2-LT StudioVision Dual 7" Rackmount Monitor

$345.00, plus shipping and 10.25% tax

SRM-7X2-LT StudioVision Dual 7" Rackmount Monitor

2 Backlit IPS Monitors in 19" Rackmount
2 Backlit IPS Monitors in 19" Rackmount
1280 x 800 Resolution
800:1 Contrast Ratio
3G-SDI, HDMI, Analog Inputs & Loop Outs

$345.00, plus shipping and 10.25% tax

$25 UPS Ground shipping cost to “lower US 48 states”

Contact me if buying from another location for shipping rate.

Contact me for shipping rate if expedited shipping is desired.

https://www.elvidcinema.com/product/7001/Elvid-SRM_7X2_LT-StudioVision-Dual-7''-Monitor-Rackmount

The Dual 7” Rackmount Monitor is ideal for remote monitoring of two cameras on a mobile cart, like an audio production cart. It has excellent control of aspect ratio, picture adjustments and many other configurations. It is bright enough to be used in bright sunlit locations with a shade hood. Adjustable mount sold separately.

I normally used the StudioVision display to monitor video from cameras A and B for accurate microphone placement on my audio production cart for film, TV and commercials.

The CatSnake 5e network cable system I am also selling can send and/or receive 4 channels of NTSC video or analog audio using the 4 channel Mixlab baluns.

The specialty Cat 5e cable is an armored flexible heavy-duty cable, allowing 4 channels over the one small, cable. The Neutrik CatSnake XLR RG-45 couplers protect the connectors providing extreme reliability and a quality signal. The system I am selling has 2 cables, each 125 ft, which can be used together to send/receive for a total distance of 250 feet. Check the other listings for details of the system parts.

The CatSnake can be used with HD SDI video when down-converted to NTSC video. The NTSC video displayed on 7” monitors is suitable for most monitoring needs. This system allows high-quality video monitoring on the 7” rackmount monitors.

The system I am selling uses quality Decimeter2 downconverters to insure the NTSC video is of high quality. The downconverters and one end of the CatSnake balun system usually are mounted on the VTR or other video cart. The other end of the system is mounted and connected to the Audio Production Cart.

Decimator Downconverter #1

$295.00, plus shipping and 10.25% tax

$15 UPS Ground shipping to “lower US 48 states”.

Contact me if buying from another location for shipping rate.

Contact me for shipping rate if expedited shipping is desired.

Miniature (3G/HD/SD)-SDI to both HDMI and NTSC/PALwith simultaneous scaling on both outputs andDe-embedded Analogue Audio

http://decimator.com/Products/MiniConverters/decimator2/decimator2.html

The system I am selling uses quality Decimeter2 downconverters to ensure the NTSC video is of high quality. The downconverters and one end of the CatSnake balun system usually are mounted on the VTR or other video cart. The other end of the system is mounted and connected to the Audio Production Cart.

Decimator Downconverter #2

$295.00, plus shipping and 10.25% tax

$15 UPS Ground shipping to “lower US 48 states”.

Contact me if buying from another location for shipping rate.

Contact me for shipping rate if expedited shipping is desired.

Miniature (3G/HD/SD)-SDI to both HDMI and NTSC/PALwith simultaneous scaling on both outputs andDe-embedded Analogue Audio

http://decimator.com/Products/MiniConverters/decimator2/decimator2.html

CatSnake 5e network AV 4 channel cable system

$275.00 plus shipping and 10.25% tax

CatSnake 5e network AV 4 channel cable system

$25 UPS Ground shipping to “lower US 48 states”.

Contact me if buying from another location for shipping rate.

Contact me for shipping rate if expedited shipping is desired.

The CatSnake 5e network cable system I am also selling can send and/or receive 4 channels of NTSC video or analog audio using the 4 channel Mixlab baluns.

The Dual 7” Rackmount Monitor is ideal for remote monitoring of two cameras on a mobile cart, like an audio production cart. When used with the CatSnake system, it receives NTSC video to produce sharp, detailed, bright images. It has excellent control of aspect ratio, picture adjustments and many other configurations. It is bright enough to be used in bright sunlit locations with a shade hood.

I normally used the StudioVision display to monitor video from cameras A and B for accurate microphone placement on my audio production cart for film, TV and commercials.

The CatSnake 4 channel system is ideal for on-set monitoring of up to 4 cameras.

Adjustable Dual 7inch Monitor Mount

$150.00, plus shipping and 10.25% tax

Provides tilt adjustment for dual 7” studio monitor
High strength and construction

$150.00, plus shipping and 10.25% tax

$25 UPS Ground shipping cost to “lower US 48 states”

Contact me if buying from another location for shipping rate.

Contact me for shipping rate if expedited shipping is desired.

This mount is ideal for a Dual 7” Rackmount Video Monitor used for remote monitoring of two cameras on a mobile cart, like an audio production cart.

Microphone HD Collapsible Boom Stand

$250.00, plus shipping and 10.25% tax

Microphone HD Collapsible Boom Stand

Heavy Duty for all recording situations
2 “Rocky Mountain” legs for all-terrain stability
Shot bags can be used to safely hold long poles
Holds two mic booms
Collapsible to small footprint
Ideal for both small interiors and wild outdoors!
Mics, booms and shot bags not included, LOL

$250.00, plus shipping and 10.25% tax

$30 UPS Ground shipping cost to “lower US 48 states”

Contact me if buying from another location for shipping rate.

Contact me for shipping rate if expedited shipping is desired.

Pelsue 6506D Cart Tent

$345.00, plus shipping and tax

Pelsue 6506D Cart Tent

Heavy Duty Linesman Tent
Durable and east to setup
6ft X 6ft X 6.5ft high
Large door to roll in Cart
Collapsible to small footprint
Weatherproof for recording in stormy, rainy or foggy exteriors
Tent stakes included
Note: There are two high quality repairs made: see photos

Current new sales info for tent: https://www.firstplacesupply.com/work-tents/pelsue-standard-series-tents/?sku=6506A&gclid=CjwKCAjw9qiTBhBbEiwAp-GE0bZHDXcdHNcqNNISV-bD7TK7FerAd7fPzLLEtXcyiqxKMj2FB1bVxRoCbRsQAvD_BwE

$345.00, plus shipping and tax

$38 UPS Ground shipping cost to “lower US 48 states”

Contact me if buying from another location for shipping rate.

Contact me for shipping rate if expedited shipping is desired.

5 Pin Time Code Lemo connectors – One pair

$49.00 plus 10.25% Tax

FREE GROUND SHIPPING TO DOMESTIC US LOCATIONS

5 Pin Time Code Lemo connectors – One pair

This is a pair of new 5 Pin Time Code Lemo connectors that can be used with most cameras, TC sync boxes and digital recorders . It will accommodate cables of 4.2 to 5.2mm O.D. Part number: FGG.0B.305.CLAD52. Smaller cables can be used with shrink tubing to build up the diameter and provide strain relief. The cable collet will hold a cable of up to 5.2mm and the Canare L-4E5C (miniature star-quad mic cable, 4.7mm OD) fits perfectly as well as any smaller cables when used with shrink tubing. Ideal for all Time Code media equipment.

Stoll Audio Production MixCart

$7250.00 plus 10.25% tax.

Local pickup suggested as shipping will add considerably to the price! Please message me if you want to add or subtract items. This wonderful recording cart is priced to sell and I am open to dealing! Message me with questions! All offers considered! Nelson Stoll

Overview

I designed this production cart to be a complete recording and TimeCode sync playback portable platform that is easily and quickly configurable for any recording or playback job.

It is a rock-solid, totally reliable studio on wheels, equally at home in the studio and tough enough to go anywhere and record reliably in challenging exterior locations, while providing the highest quality BWAV multi-track recordings. Note the exceptional construction in the photos. All equipment mounts are designed for extreme physical use. It has been used mainly for production audio recording for films, episodic TV, commercials and large corporate productions. It is equally at home doing 32 channel music tracking or complex film or video setups. The cart upper shelf collapses reducing the overall height to 49 inches to fit the MixCart in small vans, with near-instant setup and lowering.

This cart is operated using a tall stool or standing, providing exceptional equipment mounting space with 19” rack mounting on front and back along with good sound mixer visibility while working.

Based on a Midas M32R digital console capable of recording up to 32 tracks. The console can be easily configured to feed multiple output mix tracks for custom mix tracks and monitoring. The recording quality of the Midas M32R is world class, with very low noise, extremely wide bandwidth frequency response, dynamics and detail. The audio quality is very neutral and provides a high level of clarity. The built-in limiters, equalization and compression dynamics are free of phase distortion and very effective and natural sounding. Dugan auto-mixing is built in. Memorized setup templates make project setup easy.

The MixCart can be collapsed to reduce height and fit in small vans by tilting down the equipment shelf on top. Expansion to full cart height ready to record requires only a few minutes and no cabling changes from the collapsed cart position. Normally the cart is stored fully setup, ready to go and securely transported using e-Track in trucks.

All MixCart system cabling is of the best quality and construction and with proper service loops, allowing access to any needed adjustments or service.

The MixCart has HD lightened aluminum four corner protection rails with hard rubber bumpers for rachet-strapping in trucks with e-track for totally secure transportation. Rails also include ¼ -20 threaded bolt holes for shipping mounts if ever needed.

The main cart includes a MacMini Model 6.2 computer with Core i7 CPU and 2 Solid State Drives. This provides plenty of power for high-track count recording and playback using the Pokitec BoomRecorder recording software, usually producing 24 bit 48khz BWAV polyphonic files. The MacMini is in perfect, like new condition, fully updated and extremely reliable. The Mac USB keyboard and Logitech trackball are mounted on separate aluminum/Velcro mounts for easy cart collapsing/storing with NO cable disconnection, while providing ergonomic use positioning when recording for comfortable data entry and software control.

Belkin Pure Sine Wave UPS power conditioner provides for an exceptionally low noise floor, power protection and conditioning.

Mac Mini Model 6.2 computer.

Core i7 2.6GHZ-OSX 10.9.5, 16GB JMicron RAM, SN: C07MV0LHDY3H

Model A1347 (EMC 2570) , SN: C07MV0LHDY3H, 2.6 GHz Core i7 (I7-3720QM)

Internal Drives: Samsung 850 Pro SSD 512GB, OWC Mercury Electra SSD 480GB

Apple full USB keyboard, Logitech Trackman Wheel trackball.

HP L1506x 15” Extra bright retail sales display for easy viewing in all conditions.

Fitted hood for the HP display monitor included.

Note the heavy-duty custom display mounts in photos.

Included Mac OS software:

Pokitec BoomRecorder Netherlands

https://www.pokitec.com/products/BoomRecorder/

ProTools 10 software with key dongle

Microsoft Office Mac 2011

Carbon Copy Cloner backup software provides complete imaging redundancy for instant disaster recovery backups if ever needed. (Not needed so far!....system is highly reliable)

Tech Tool Pro 7

Clean My Mac 2

Included Misc Hardware on core Mix Cart

GB Ethernet switch, USB 3.0 switch, External Compact Flash reader/writer

Slate Mic: Studio quality Sennheiser MZH3040x installed on Mix Cart

Belkin 1500VA UPS (F6C1500-TW-RK) Pure Sine Wave power conditioner

Custom cart shock mount for Midas M32R mixing console

Geist AC Power distro 19” rack unit

Hand/parking brakes

Built in adjustable Cart LED lighting

Built-in folding IFB antenna Block 26 (can be cut for any desired frequency block)

Heavy Duty cart handles at both cart ends for easy movement control

Spare cart wheels/tires and brake cables

Cart Tractor umbrella and cart umbrella mount

Cart includes full 13 units of 19” rack mount space in front and a four rack space mount in back.

Half rack space contains 2 HD sliding shelves. One empty and one used for MacMini, Compact Flash reader and space for master TC clock.

Setup documentation and manuals for Mix Cart, Recording software and included equipment

CAD drawings for the cart and sub-systems

Not included in core Mix Cart: (see separate listings)

Midas DL-16 AES50 16 input ethernet stage box and XLR interconnects using Neutrik XX XLR interconnects Canare L-4E6S color coded 6 Ft. DL-16 cables sold separately.

Master Denecke GR-1 Time Code generator/receiver, TC distro cable snake and extra backup snake system sold separately.

Shure UR4D Radio mic receivers, RF high-gain antennas and mounts and Shure RF Distro system sold separately.

Dual 7” HD video monitors and AV catsnake system sold separately.

Shure UR4D H4 Dual Diversity RF Receiver
Shure UR4D+ G1 Dual Diversity RF Receiver

Shure UR4D H4 Dual Diversity RF Receiver

$595 plus 10.25% tax. $35 UPS Ground shipping to lower 48 states

Contact me for shipping cost to Alaska, Hawaii or other locations.

SN: IC174021. Excellent condition. Includes original new unused antennas, bnc jumpers and plugs.

518mHz to 578mHz wide bandwidth receiver.

Note The photos include the MixCart cooling accessory that provides extremely quiet slow speed cooling so that the Shure internal receiver fans never come on when recording in extremely hot interior locations. This is available to purchase separately or included if one or two of the Shure UR4D receivers are bought with the MixCart.

The MixCart radio mic system has very high-quality audio and RF capabilities. This receiver is the standard pro radio receiver in most large high-end venues due to its high track count and RF performance.